cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
508
Views
0
Helpful
4
Replies

Catalyst 6000 Supervisor Engine 2 ROMMON Upgrade

boonchin.ng
Level 1
Level 1

Hi,

I am unable to upgrade the ROMMON to release 7.1(1).

When I entered the upgrade rom-monitor command, instead of running the upgrade process it just copying the .srec file from tftp server.

Please kindly advice.

4 Replies 4

Amit Singh
Cisco Employee
Cisco Employee

Hello Friend,

As per the output attached you are on RP. Try the following and paste the output:

Router# remote command switch show version

The above should work and give you the output from SP.If you face any issues, try

Router# remote login switch

and then do the show version.

Check the boot rom strap version there.

HTH,

-amit singh

Attached is the details for [remote command switch show version]

Amit Singh
Cisco Employee
Cisco Employee

Also, did you try reloading or resetting the sup engine after rommon upgrade?

-amit singh

Yes. I did

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: