03-21-2007 05:38 AM - edited 03-09-2019 05:38 PM
I am experiencing a difficult issue with the Windows Cisco VPN Client (4.6.02)
The client connects fine over a cable broadband connection, but when connected over a dial up connection, the client generates a "Bad hash payload" type errorset.
Can anyone help with this? I have tried several hours of trouble shooting without any progress.
Thanks.
03-21-2007 05:53 AM
Can you please post the complete logs from the client.
-Kanishka
03-21-2007 06:22 AM
Cisco Systems VPN Client Version 4.6.02.0011
Copyright (C) 1998-2004 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.0.2195 Service Pack 4
Config file directory: C:\Program Files\SpheriX\SpheriX VPN\
1 16:18:38.171 03/20/07 Sev=Warning/3 IKE/0xE3000056
The received HASH payload cannot be verified
2 16:18:38.171 03/20/07 Sev=Warning/2 IKE/0xE300007D
Hash verification failed... may be configured with invalid group password.
3 16:18:38.171 03/20/07 Sev=Warning/2 IKE/0xE3000099
Failed to authenticate peer (Navigator:904)
4 16:18:38.171 03/20/07 Sev=Warning/2 IKE/0xE30000A5
Unexpected SW error occurred while processing Aggressive Mode negotiator:(Navigator:2202)
5 16:21:14.828 03/20/07 Sev=Warning/3 IKE/0xE3000056
The received HASH payload cannot be verified
6 16:21:14.828 03/20/07 Sev=Warning/2 IKE/0xE300007D
Hash verification failed... may be configured with invalid group password.
7 16:21:14.828 03/20/07 Sev=Warning/2 IKE/0xE3000099
Failed to authenticate peer (Navigator:904)
8 16:21:14.828 03/20/07 Sev=Warning/2 IKE/0xE30000A5
Unexpected SW error occurred while processing Aggressive Mode negotiator:(Navigator:2202)
03-21-2007 06:40 AM
Are you sure , you are using the same group when connecting through dialup ?
It says, the group password is incorrect, please make sure, the group name and password is the same.
-Kanishka
03-21-2007 06:46 AM
The exact same configuration connects without fail over the cable broadband connection. Same group name, password, etc.
The errors only occur when connecting of dial up. I have checked and made sure hardware compression is off on the modem, software compression is off, etc.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: