OID's required

Unanswered Question
Mar 21st, 2007
User Badges:

I need to get OID for the following items for Cisco 7206 Routers, 6500,4500,4000 Series Switches and 515 E Firewall for the following features:


1. Power Unit Status


2. CPU Utilization (One Minute/ five minute average)


3. Memory


4. Temperature


5. Interface Status


Where to get these ?


Thanks,

Pete


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.7 (5 ratings)
Loading.
David Stanford Wed, 03/21/2007 - 06:45
User Badges:
  • Cisco Employee,

Have a look at these MIB's specifically:


1. Power Unit Status - CISCO-STACK-MIB, CISCO-ENVMON-MIB, ENTITY-MIB and ENTITY-FRU-CTRL-MIB ex) ciscoEnvMonVoltageStatusTable

for IOS and chassisPs1Status for CatOS


2. CPU Utilization (One Minute/ five minute average) - CISCO-PROCESS-MIB ex) cpmCPUTotal5sec


3. Memory - CISCO-MEMORY-POOL-MIB ex) ciscoMemoryPoolTable


4. Temperature - CISCO-ENVMON-MIB and CISCO-STACK-MIB


5. Interface Status - IF-MIB and CISCO-STACK-MIB


Once you find the objects you want you can translate from name to number at:


http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en



Craig Balfour Wed, 03/21/2007 - 08:09
User Badges:
  • Bronze, 100 points or more

All of the Cisco MIBS are available in ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz.


Open the MIBs in a text editor and read through some of the descriptions - they are actually quite useful for determining what the MIB does and how to use it.


1. For power supply status take a look at the CISCO-ENVMON-MIB MIB. Querying

ciscoEnvMonSupplyState.1 (.1.3.6.1.4.1.9.9.13.1.5.1.3.1), for example will give you that status (normal, etc) of power supply 1.


2. For CPU status look at CISCO-PROCESS-MIB. For example querying cpmCPUTotal1minRev.1

(.1.3.6.1.4.1.9.9.109.1.1.1.1.7.1) returns the overall CPU busy percentage in the last one minute on the first CPU. Similarly, querying cpmCPUTotal5minRev.1 gives you the same data for a five minute period.


3. Various bits of memory related information is also available via CISCO-PROCESS-MIB.


4. Temperature information is available in the CISCO-ENVMON-MIB MIB.


5. Basic interface status information is available via RFC1213-MIB. Look at the ifTable object for a table of information.


Many MIBs define Table objects which provide lots of useful data in a tabular form. For example querying ifTable in RFC1213-MIB returns as table of interfaces with information such as a interface description, speed, physical address, admin status, operational status, in and out octets etc.


The most useful way I have found to query a MIB table object is using the Net-SNMP [1] snmptable utility as follows (on a unix machine):


snmptable -M /usr/share/snmp/mibs -m ALL -v 1 -c public 192.168.100.1 ifTable | less -S


1. http://net-snmp.sourceforge.net


Actions

This Discussion