03-21-2007 11:49 AM - edited 07-03-2021 01:48 PM
Hi,
Anyone seen this error on a WISM modul befor,
----------------snip----------------
Message
Keepalive messages are lost between Master and Controller'172.31.228.8'.
Help
Keepalive messages are lost between Controller '172.31.228.8'and Master.Please check the controllers port configuration, any software or hardware incompatibility issues.
172.31.228.8 > Controller Properties
Misconfigured WiSM Controller #0
----------------snip----------------
WISM modul are placed in to 6509, directly connected,
Best Regards
Peter
03-21-2007 11:02 PM
Hi Peter,
Can you paste the output of "sh run | in wism" from your supervisor?
Regards,
Ankur
03-21-2007 11:45 PM
Hi Ankur,
sh run | in wism
wism service-vlan 9
shows the same on both routers,
Regards
Peter
05-14-2007 07:51 AM
Was there ever a resolution for this issue?
12-11-2008 11:04 AM
Check your etherchannel load-balancing config
It should be:
sh etherchannel load-balance
EtherChannel Load-Balancing Configuration:
src-dst-ip
to configure it:
show6506A(config)#port-channel load-balance ?
dst-ip Dst IP Addr
dst-mac Dst Mac Addr
dst-mixed-ip-port Dst IP Addr and TCP/UDP Port
dst-port Dst TCP/UDP Port
mpls Load Balancing for MPLS packets
src-dst-ip Src XOR Dst IP Addr
src-dst-mac Src XOR Dst Mac Addr
src-dst-mixed-ip-port Src XOR Dst IP Addr and TCP/UDP Port
src-dst-port Src XOR Dst TCP/UDP Port
src-ip Src IP Addr
src-mac Src Mac Addr
src-mixed-ip-port Src IP Addr and TCP/UDP Port
src-port Src TCP/UDP Port
12-10-2008 11:33 AM
Were you able to resolve this? What was the fix?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: