03-21-2007 01:01 PM - edited 07-03-2021 01:48 PM
hello everybody,
we installed a new wlc 4404 for wireless access.before we installed autonomus AP and with this all works fine!
the problem is with the client authentication.
old installation: Odyssey Client<>AP<>ACS<>RSA Server
new installation: Odyssey Client<>LWAP<>4404WLC<>ACS<>RSA Server
when i authenticate with the old installation: Peap starting with odyssey client , i enter response and i am open authenticated
when i authenticate with the new installation:Peap starting with odyssey client, i enter response i can not authenticate always the popup window for enter the response (passcode) comes up!
whats the problem?
its strange, when i autenticated with the old installation then i change to new installation i dosent must authenticate again and it works over the new installation. i recive a new ip from the WLC pool. when i start the pc new and i will authenticate with the new installation its doesent work.
thanks for a response
nik
03-21-2007 11:46 PM
HI Nik,
I beleive in your new setup your controller can ping/reach ACS?
Regards,
Ankur
03-22-2007 04:17 AM
Hi Ankur,
Yes i can ping the ACS from WLC
ACS Software v 3.3
WLC Software 4.0.206.0
Nik
03-22-2007 11:24 AM
Hello
new info from WLC authentication log:
Thu Mar 22 18:20:09 2007 [SECURITY] 1x_ptsm.c 407: MAX EAP retransmissions reached for mobile 00:18:de:a5:a4:ef
Thu Mar 22 18:20:06 2007 [SECURITY] 1x_bauth_sm.c 423: Backend Authentication SM: abortAuth: Authentication Aborted.
Thu Mar 22 18:19:59 2007 [SECURITY] 1x_ptsm.c 407: MAX EAP retransmissions reached for mobile 00:18:de:a5:a4:ef
Thu Mar 22 18:19:59 2007 Previous message occurred 2 times
Thu Mar 22 18:19:19 2007 [SECURITY] 1x_auth_pae.c 2448: Reached Max EAP-Identity Request retries (21) for STA 00:18:de:a5:a4:ef
Thu Mar 22 18:18:59 2007 [SECURITY] 1x_ptsm.c 407: MAX EAP retransmissions reached for mobile 00:18:de:a5:a4:ef
Thu Mar 22 18:18:59 2007 Previous message occurred 2 times
Thu Mar 22 18:18:51 2007 [SECURITY] aaa.c 661: Authentication succeeded for admin user 'admin'
Thu Mar 22 18:17:25 2007 [SECURITY] 1x_ptsm.c 407: MAX EAP retransmissions reached for mobile 00:18:de:a5:a4:ef
Thu Mar 22 18:16:45 2007 [SECURITY] 1x_auth_pae.c 2448: Reached Max EAP-Identity Request retries (21) for STA 00:18:de:a5:a4:ef
Thu Mar 22 18:16:32 2007 [SECURITY] aaa.c 661: Authentication succeeded for admin user 'admin'
Thu Mar 22 18:16:25 2007 [SECURITY] 1x_auth_pae.c 2448: Reached Max EAP-Identity Request retries (21) for STA 00:18:de:a5:a4:ef
03-27-2007 12:06 PM
the problem is solved. we changed the timmer setting on wlc...
05-03-2007 09:38 PM
Hi, what setting, "timer" or "timmer"?
06-12-2007 09:38 PM
Hi, I am also facing your problem which is little bit different. We can use Wireless for few hours however it did not last for a long time. Some user can use 2~3hours but suddenly request re-authentication. I would like to know what I can refer to solve this. Could you advise?
Our infrastructure is the same as you.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: