Cisco 3845 Link Redundancy

Unanswered Question
cpembleton Mon, 03/26/2007 - 21:24
User Badges:
  • Silver, 250 points or more

You could put each interface in a differnt subnet on the cores. Then you could configure floating static routes. Or you could use a dynamic routing protocol like OSPF or EIGRP. Or you could you Policy based routing to control the traffic route. Or you could use object tracking to insert the default route depending which one is up.

Really depends on what your running for your cores and what they support.

Hope this gets you in the right direction.



Please rate if this helps!


This Discussion