Help with QOS

Unanswered Question
Mar 22nd, 2007
User Badges:

Hi,


We have 2MB circuit to the US that gets flooded every night by a specfic machine. I want to appy a QOS policy that defines this machine and reduces its priority so that when the link becomes saturated the traffic is discarded.


Any help well rated.



Thanks



Gavin

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
cfolkerts Thu, 03/22/2007 - 08:36
User Badges:

I would apply policing to discard that traffic.


First define an ACL that permits all ip traffic from that specific machine.

access-list 101 permit ip x.x.x.x 0.0.0.0 (host machine) any


next define a class-map that identifies the ACL we did previously.

class-map POLICE_TRAFFIC

match access group 101


then define the policy-map to police that traffic.

policy-map POLICE

class POLICE_TRAFFIC

police x (threshold were if traffic exceeds x it will be dropped)


then apply the policy map to the outgoing interface.

service-policy POLICE out


More information on policing is on the link below.


http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_c/fqcprt4/qcfpoli.htm


HTH

Actions

This Discussion