03-22-2007 05:12 PM - edited 03-14-2019 08:38 PM
Anyone have any idea on how to control the Call Park Display message timeout? Have a requirement to have it stay on the screen until the call is either picked up or disconnected. I have checked all the timers I can come up with and no luck. I am told it is possible in CME.
Thanks!!!
Adam
03-23-2007 03:04 PM
Adam,
Have a look at these URLs:-
CME 3.1 for example
CME 4
Hope these may help.
03-24-2007 01:33 PM
Unfortunately I have read both of these docs several times in the past trying to solve this issue, but to no avail. They only appear to use the timeout command for reminders. No other feature seems to control the display.
Thanks for the input!
Adam
01-29-2008 11:56 AM
Have you found any solution to this?
Thanks
Senthil
01-29-2008 12:06 PM
The only solution I could come up with was to adjust the call park timers so that for example a person would get notified every 10 seconds for 6 time periods for a total of 1 minute. Otherwise there was not any method of keeping the display active.
02-18-2008 02:35 PM
I figured that one.
Thanks for the reply.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: