Hello. Please see the attached diagram. When I show up in the cloud from my firewall, I need to show up as 192.168.166.10, not as my router interface (192.168.166.1). Can anyone tell me the commands to make this happen? Is it possible to have an address translated to an address on the same subnet?
We previously did this on the firewall, but have just put a router there.
You can do that.
Configure a PAT to 192.168.166.10 for the inside subnets. Make sure the Patted IP is not assigned to anyone
ip nat pool POOL_internet 192.168.166.10 192.168.166.10 prefix-length 24
ip nat inside source list 101 pool POOL_internet overload
access-list 101 permit ip any
HTH, rate if it does