Solved: ospf load balancing

bapatsubodh · ‎03-26-2007

hi

we are facing load balancing problem.

Details of network set up is given in attached msword document.

Any suggestions..

Thanks in advance

Subodh

parthibanp · ‎03-26-2007

Hi

Try enabling per packet load balancing on the involved interfaces (seria&ethernet) on all the rotuers involved.

View solution in original post

Amit Singh · ‎03-26-2007

Subodh,

Can you please post the config from both R1 and R3 and also "show ip route "

-amit singh

bapatsubodh · ‎03-27-2007

Dear Mr. Singh,

all routers R1, R2, R3, and R 4 are all 7507 series routers having more that 800 rouets. SO i think it's practically difficult to caputre o/p or sh ip route. Can i post any particular routes , wherein router shows two paths of equal cost to destinations.

Pls. ack back.

( Also I will try per packet switching if possible as mentioned in second reply )

Thanks and Regards.

Subodh

parthibanp · ‎03-26-2007

Hi

Try enabling per packet load balancing on the involved interfaces (seria&ethernet) on all the rotuers involved.