Hi,
The network topology is :
user's pc---Cisco3600---CSM-S---FWSM---Server
User needs to access server's real IP. How to configure the CSM-S? I tried the configuration below but failed to ping the server from user's pc.
I configured a static route on server vlan of CSM-S to direct user's request to the firewall. Also, a default gateway(3600's ip) is configured on client vlan.
serverfarm ROUTE
no nat server
no nat client
predictor forward
vserver DIRECT-ACCESS
virtual 192.168.27.0 255.255.255.192 any
serverfarm ROUTE
replicate csrp sticky
replicate csrp connection
persistent rebalance
inservice
Have I missed anything else?
Thanks
J.W.