How to add an AP to AP Group on redundant controller?

Unanswered Question

I have AP Groups configured and working fine on my primary WLC. I can find no way to add APs to the AP Groups that I have defined on my redundant WLCs.(short of associating the APs to each of the redundant controllers, adding the APs to the AP groups etc.)

1 X Primary = WLC 4404 v4.0.206

3 X Redundant = WLC 4102 v3.2.193.5

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (2 ratings)
Loading.
jakew Mon, 04/02/2007 - 06:08
User Badges:
  • Silver, 250 points or more

The AP Group Name assigned to an AP is one of the config parameters the AP stores locally in NVRAM and carries with it to a new controller. So, as long as the AP Group Name is the same on the redundant WLCs as it is on the primary, you're golden.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode