I have a 1721 at office would like to configure it as a easy VPN server so clients can connect remotely to the office
I used SDM to configure it and it is sucessfully tested by SDM.
But i am unable to connect to it using Cisco Client
When i am configuring the client i am using WAN ip as the hostname and techno as the group and shared key as as password
This is what i get in the connecting logs
2 23:00:17.304 03/26/07 Sev=Warning/2 IKE/0xE300009B
Invalid SPI size (PayloadNotify:116)
3 23:00:17.304 03/26/07 Sev=Warning/3 IKE/0xA3000058
Received malformed message or negotiation no longer active (message id: 0x00000000)
Attaching running config
Just a FYI - internet and local LAN is running successfully with the running config.
Please advise me on how to fix this otherwise give me link to documents which describes step by step using SDM if it is there.
Thanks in Advance