Best way to configure 4 CE500 and 1 2960G

Unanswered Question


I have 4 CE500 and 1 2960G. I would like to know an example of a good connction configuration.

Right now my setup is far from optimal because I had some problems. For some reasons I could not have my IP phones to register with the Call Manager if all 4 CE 500s were connected in the 2960G. I needed to connect all my CE500 switches together using a random port (not the 1GB port) in order for them to register with the Call Manager.

This setup wont work with my ip phone if I dont link the CE500s together using a random port :( I dont know why.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
hagirebench Mon, 04/02/2007 - 01:12
User Badges:

try upgrading the IOS of all of the CE500 (get the latest version)then, trunk the switch to switch connections (for CE500 make it a switch)

hope this helps




This Discussion