Catalyst 2950 and IOS upgrade

Unanswered Question
Mar 27th, 2007

Hi all,

i would like to upgrade catalyst 2950 with current IOS image c2950-i6k2l2q4-mz.121-22.EA7.bin. But there is no command (archive download-sw) in current IOS. When I type "archive ?" i just get "tar List or extract files in a tar image" but in Configuration Guide here

http://www.cisco.com/en/US/products/hw/switches/ps628/products_configuration_guide_chapter09186a00804762a2.html#wp1086981 it says just the opposite. Any idea?

Thanks for reply.

KarL

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Collin Clark Tue, 03/27/2007 - 12:53

KarL-

Since your using a bin file, you can use the following command;

copy tftp:///c2950-i6k2l2q4-mz.121-22.EA7.bin flash:

This will probably erase flash first (it will only if there is not enough room for both images), then copy the image over. Don't forget to reload to 'load' the image.

HTH and please rate.

Actions

Login or Register to take actions

This Discussion

Posted March 27, 2007 at 12:41 PM
Stats:
Replies:1 Overall Rating:
Views:350 Votes:0
Shares:0
Tags: No tags.
 

Discussions Leaderboard

Rank Username Points
1
Jon Marshall
16,601
2
Reza Sharifi
9,319
3
Giuseppe Larosa
8,202
4
Peter Paluch
7,599
5
Leo Laohoo
7,596
Rank Username Points
Jon Marshall
532
Reza Sharifi
126
Joseph W. Doherty
116
Bilal Nawaz
64
Peter Paluch
61