How to flush / renew hosts table in a 3750 switch stack?

Answered Question
Mar 28th, 2007
User Badges:

I have swapped IP addresses between hosts space-s and apollo7-s on DNS servers. Only 3750 insist on old values in its hosts table. There is not possible to ping apollo7-s from 3750 by name. It is possible by number only.


ss-s01-1#sh hosts

Default domain is fzu.cz

Name/address lookup uses domain service

Name servers are 147.231.26.154, 147.231.126.127

...

Host Port Flags Age Type Address(es)

...

space-s.fzu.cz None (temp, OK) 17 IP 10.26.202.33

apollo7-s.fzu.cz None (temp, OK) 0 IP 10.26.202.30

! Old values ^^^^

...

ss-s01-1#sh ver

Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1)



ss-a2p7#sh hosts

Default domain is fzu.cz

Name/address lookup uses domain service

Name servers are 147.231.26.154, 147.231.126.127

...

Host Port Flags Age Type Address(es)

...

apollo7-s.fzu.cz None (temp, OK) 0 IP 10.26.202.33

! New value ^^^^ (IP ...30 is not working at present)^^.


Thanks,

Tomas


Correct Answer by didyap about 9 years 12 months ago

Try clear host {name | *} command to remove one or all entries from the hostname and the address cache.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
didyap Tue, 04/03/2007 - 05:50
User Badges:
  • Silver, 250 points or more

Try clear host {name | *} command to remove one or all entries from the hostname and the address cache.


Actions

This Discussion