cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7160
Views
5
Helpful
1
Replies

How to flush / renew hosts table in a 3750 switch stack?

t.fiala
Level 1
Level 1

I have swapped IP addresses between hosts space-s and apollo7-s on DNS servers. Only 3750 insist on old values in its hosts table. There is not possible to ping apollo7-s from 3750 by name. It is possible by number only.

ss-s01-1#sh hosts

Default domain is fzu.cz

Name/address lookup uses domain service

Name servers are 147.231.26.154, 147.231.126.127

...

Host Port Flags Age Type Address(es)

...

space-s.fzu.cz None (temp, OK) 17 IP 10.26.202.33

apollo7-s.fzu.cz None (temp, OK) 0 IP 10.26.202.30

! Old values ^^^^

...

ss-s01-1#sh ver

Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1)

ss-a2p7#sh hosts

Default domain is fzu.cz

Name/address lookup uses domain service

Name servers are 147.231.26.154, 147.231.126.127

...

Host Port Flags Age Type Address(es)

...

apollo7-s.fzu.cz None (temp, OK) 0 IP 10.26.202.33

! New value ^^^^ (IP ...30 is not working at present)^^.

Thanks,

Tomas

1 Accepted Solution

Accepted Solutions

didyap
Level 6
Level 6

Try clear host {name | *} command to remove one or all entries from the hostname and the address cache.

View solution in original post

1 Reply 1

didyap
Level 6
Level 6

Try clear host {name | *} command to remove one or all entries from the hostname and the address cache.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: