03-28-2007 08:37 AM - edited 03-05-2019 03:09 PM
We have a pair of Cat6509's on one floor of the LAN that have HPt5710 terminals connected to 5 x WS-X6148-GE-TX modules. Other floors with the same terminals and switches don't have this problem.
The problem is that when our TS team rollout an image using Altiris/PXEboot, a few of the terminals fail to receive the new image or fail to connect to the PXEboot server.
This seems isolated to a few switchports across 2 or 3 of the WS-X6148-GE-TX Modules. One thing noticeable is that if you pause the terminal as it tries to discover the PXEboot Server it will eventually discover the PXEboot Server and continue to upload an image.
I'm wondering whether this is software related as we are running CatOS v8.4(5).
As this is a 24x7 site I don't want to yet go down the road of performing discruptive diagnostics on the switches.
Anyone else experienced this type of scenario?
thanks
Mark
04-03-2007 06:20 AM
Use the set port host command to optimize the port configuration for a host connection.
04-03-2007 06:39 AM
Thanks for the response. Just to clarify wouldn't the command 'set spantree portfast
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: