C2950 crashes while talking to FreeRadius

Answered Question
Mar 29th, 2007
User Badges:

hi,


i have a problem with switch talking to radius server for 802.1x credentials. basically when it receives accept message from radius with vlan assignment it simply crashes and restarts promptly. has anyone had similiar problems? i use software version 12.1(22)EA8 and freeradius-1.0.1-3.RHEL4.3


there's switch configuration, excerpt from log and radius user config and dictionary file under this link:

http://kuromaku.kondi.net/c2950/

Correct Answer by answanso about 10 years 4 months ago

It looks like:


CSCse88604

Externally found moderate defect: Resolved (R)

2940 switch reloads with VLAN assign from Radius


Fixed in 12.1(22)EA9 and later. Try to upgrade to this version or a later one preferably.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
answanso Thu, 03/29/2007 - 22:27
User Badges:
  • Cisco Employee,

It looks like:


CSCse88604

Externally found moderate defect: Resolved (R)

2940 switch reloads with VLAN assign from Radius


Fixed in 12.1(22)EA9 and later. Try to upgrade to this version or a later one preferably.

krzentarzewski Fri, 03/30/2007 - 08:47
User Badges:

thank you. i've upgraded to 12.1(22)EA9 and vlan assignment works just as expected with the following radius attributes:


Tunnel-Medium-Type:1 = IEEE-802

Tunnel-Type:1 = VLAN

Tunnel-Private-Group-Id:1 = 100

Actions

This Discussion