E1 Controller

Answered Question
Mar 29th, 2007
User Badges:

Hello,


Two questions:

If i use an E1 G703 for a lease line at 256k. I need to configure 2 or 4 Timesolts?

I think 4 but my ISP tell me 2.


Who is right?


I think: E1 -> 2048 with sync (32ts).

1 ts = 64k. 2ts= 128k 4ts=256 !


Second question. All G703 use NSA frame?


Thank for your answer

Correct Answer by Amit Singh about 9 years 12 months ago

You need 4 tile slots for sure.


NSA frame ???


-amit singh

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (3 ratings)
Loading.
Correct Answer
Amit Singh Thu, 03/29/2007 - 06:16
User Badges:
  • Cisco Employee,

You need 4 tile slots for sure.


NSA frame ???


-amit singh

royalblues Thu, 03/29/2007 - 06:19
User Badges:
  • Green, 3000 points or more

You would need to configure 4 timeslots

Each timeslot will give you 64K and hence you would require 4 timeslots


Controller e1 0/0

channel-group 0 timeslots 1-4


I didn't clearly understood your 2nd question


HTH, rate if it does

Narayan

fargier Thu, 03/29/2007 - 06:31
User Badges:

For the second question, I think like you !! Provider send me to configure frame NSA + CRC4.


Crc4 is not a problem i can configure that. But for the NSA, i never see that. What is it? Convertion for N= ? S= ? A= ?


But thank for all your answer

Paolo Bevilacqua Thu, 03/29/2007 - 06:33
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

NSA (Non Service Affecting) is a minor alarm frame that can be sent by T1/E1. I don't think the router uses it and I've never seen it used in practice.

Actions

This Discussion