03-29-2007 06:11 AM - edited 03-03-2019 04:21 PM
Hello,
Two questions:
If i use an E1 G703 for a lease line at 256k. I need to configure 2 or 4 Timesolts?
I think 4 but my ISP tell me 2.
Who is right?
I think: E1 -> 2048 with sync (32ts).
1 ts = 64k. 2ts= 128k 4ts=256 !
Second question. All G703 use NSA frame?
Thank for your answer
Solved! Go to Solution.
03-29-2007 06:16 AM
03-29-2007 06:16 AM
You need 4 tile slots for sure.
NSA frame ???
-amit singh
03-29-2007 06:19 AM
You would need to configure 4 timeslots
Each timeslot will give you 64K and hence you would require 4 timeslots
Controller e1 0/0
channel-group 0 timeslots 1-4
I didn't clearly understood your 2nd question
HTH, rate if it does
Narayan
03-29-2007 06:31 AM
For the second question, I think like you !! Provider send me to configure frame NSA + CRC4.
Crc4 is not a problem i can configure that. But for the NSA, i never see that. What is it? Convertion for N= ? S= ? A= ?
But thank for all your answer
03-29-2007 06:33 AM
NSA (Non Service Affecting) is a minor alarm frame that can be sent by T1/E1. I don't think the router uses it and I've never seen it used in practice.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: