WCS server

Unanswered Question
MICHAEL SCHROEDER Fri, 03/30/2007 - 00:59
User Badges:

Hi Eduardo, i recommend you to run WCS as Service on a dedicated Server, without any other Application (Ok, Adobe Reader should not a be Problem), especially other Netweork Management Products. WCS uses some TCP/UDP Ports for Communication, like SNMP, FTP, TFTP, Syslog, https and so on, so you have to keep these ports available. Regards, Michael

PS: in a Lab Environment i have a WCS Server and a VMWare with Cisco ACS on the same Machine, runs perfectly.

sbarasiscom Wed, 06/20/2007 - 04:59
User Badges:

Dear Michael ,

Can you tell me what is the RAM in the machine which you use it for (ACS and WCS) and what about CPU ?

MICHAEL SCHROEDER Thu, 06/21/2007 - 01:51
User Badges:

Hi, the Machine is a HP DL140 Server with 2GB RAM and 3GHz Processor. Be aware, this is not officially supported and for Lab uses only.

Regards, Michael


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode