03-29-2007 08:49 AM - edited 03-09-2019 05:42 PM
I have just setup a 3015 VPN server. I am able to connect to the server from a client PC, but, do not see any local lan routes when connected. The secured routes only shows 0.0.0.0 0.0.0.0.
I cannot connect to any hosts beyond the 3015.
04-04-2007 09:28 AM
Just check the firewall rules like access list on the outside interface. It will cause the problem and check you can ping the network inside from the VPN Concenrator
04-04-2007 11:23 AM
Thanks, I managed to get the routes to propagate to the VPN client. I now have a peculiar problem where I am unable to telnet to any remote switch (3550) beyond the 3015. I can ping and trace to the switches (3550's) and routers (2600's) from the connected VPN client, but, cannot telnet. If I try ssh to the device, I get message indicating the port 22 connection is refused. However, a telnet to the device from a connected VPN client times out.
Any ideas ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide