03-29-2007 12:35 PM - edited 03-11-2019 02:53 AM
Have upgraded back to 7.22, also ASDM to 522, now I can not access via ASDM. I am using 2003 RADIUS for authentication, I get a username and password prompt, then nothing.
Anyone know the answer?
03-29-2007 01:02 PM
Try this-
asdm image disk0:/
HTH and please rate.
03-29-2007 04:45 PM
Thanks for the reply, I changed that as part of the upgrade.
03-29-2007 07:32 PM
If you are indicating that authentication is failing, then you need to look at the output of
debug aaa authentication
debug radius
to see why. Also, "show aaa-server" may help as well.
Sincerely,
David.
03-30-2007 01:10 PM
RADIUS works fine with SSH, it is off and on with VPN Client, but works.
It worked with no problem before the upgrade.
I have now donwgraded and the problem persists.
04-01-2007 12:57 AM
http server enable
http 10.21.36.0 255.255.255.255 inside
then check the PIX for asdm filename
ie Show flash
asdm image flash:/your file name
or you can rename the file according to the above line.
-Karthik
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: