03-30-2007 12:20 AM - edited 03-05-2019 03:11 PM
Hi,
If I configure HSRP in vlan interface, which is the best place to put the config below? Physical interface or vlan interface and why?
FYI, I put it in vlan interface because the routing information is there (i.e ip address and HSRP).
!
access-list 30 remark Multicast-filtering-ACL
access-list 30 deny 224.0.1.35 log
access-list 30 deny 224.0.1.60 log
access-list 30 deny 224.0.1.3 log
access-list 30 deny 224.0.1.2 log
access-list 30 deny 224.0.1.22 log
access-list 30 deny 224.0.1.24 log
access-list 30 deny 224.0.0.0 0.0.0.255 log
access-list 30 deny 239.0.0.0 0.255.255.255 log
access-list 30 permit 224.0.0.0 15.255.255.255 log
!
interface physical_or_vlan?
no ip redirects
no ip directed broadcast
no ip mask-reply
no ip unreachables
no ip proxy-arp
ip accounting access-violations
ip multicast boundary 30
no ip mroute-cache
ntp disable
no cdp enable
TIA
Solved! Go to Solution.
03-30-2007 12:27 AM
Hi Danilo
Not sure i fully understand. The layer 3 interface is the SVI so that is the logical place to put the layer 3 access-list that you have created.
When you say the physical interface which physical interface were you thinking of ?
If the physical interface was configured as a routed port then the access-list would go on there but this isn't what you have done.
Could you clarify ?
Jon
03-30-2007 12:27 AM
Hi Danilo
Not sure i fully understand. The layer 3 interface is the SVI so that is the logical place to put the layer 3 access-list that you have created.
When you say the physical interface which physical interface were you thinking of ?
If the physical interface was configured as a routed port then the access-list would go on there but this isn't what you have done.
Could you clarify ?
Jon
03-30-2007 12:39 AM
Hi Jon,
Thanks for your reply.
I think you have answered my question. I just tried putting those config in the physical interface, it won't accept it if I don't put routing configuration on it.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: