03-30-2007 12:27 AM - edited 03-05-2019 03:11 PM
Hello,
I`m converting 2 Cat6506 with Sup2/MSFC2 from CatOS to IOS. The Sup2/MSFC2 has only DRAM:128MB and ONBOARD FLASH:32MB. Please I need locate the way to upgrade the DRAM from 128MB to 256MB or better to 512MB.
Thanks in advance
Solved! Go to Solution.
03-30-2007 02:30 AM
Hi Luis,
Have a look at this link which will help you in upgrading DRAM
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_6953.htm
If you also want to upgrade the DRAM for sup engine then this link will help you
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_12693.htm
HTH
Ankur
*Pls rate all helpfull post
03-30-2007 02:30 AM
Hi Luis,
Have a look at this link which will help you in upgrading DRAM
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_6953.htm
If you also want to upgrade the DRAM for sup engine then this link will help you
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_12693.htm
HTH
Ankur
*Pls rate all helpfull post
03-30-2007 07:03 AM
Hi Ankur,
Thanks a lot for your info. It was very useful to solve my problem.
Thanks again
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: