03-30-2007 01:27 AM - edited 03-03-2019 04:21 PM
I have cisco 7206 VXR (c7200-is-mz.121-12b) with 2 X PA-8E1, all 16 E1 ports are connected with my remote office and I tried to load balance the traffic via static routes but the max paths shown in ip cef are six, can someone help me
03-30-2007 01:36 AM
how many paths do you see when you do a sh ip route.
Ip route does not have any limitations. i had used 8 static routes for loadbalancing in my lab and all the routes were entered in the routing table.
Not sure though whether CEF supports more than 6 routes. if this is indeed a limitation, then you can bundle six links together and have loadbalancing over all the 16 links
HTH, rate if it does
Narayan
03-30-2007 01:46 AM
I see only 6 paths, any options other than multilink ? coz multilink is cpu intensive and my router utl. is already above 75%
03-30-2007 02:16 AM
Can you post running configuration of your 7206 router, and also sh ip route
03-30-2007 03:02 AM
configuration attached.
03-30-2007 03:08 AM
Could be an IOS bug or a limitation within CEF.
I will try to simulate it in my lab.
HTH
Narayan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: