CME Failover

Unanswered Question
Mar 30th, 2007
User Badges:

CME failover


What would be the best way to implement failover in a standalone cme system.


My thoughts so far are :


Identical router minus the modules but with the same config


In the event of failure of the primary router


Remove modules and install in standby router


Present fxo lines and E1 lines to standby router


or


Identical hardware running hsrp


In the event of failure of the primary router


Present lines into hot standby router


Caveats no voicemail ?


Looking for the best solution with minimal downtime


Anybody running any similar sort of implementation ?


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Fri, 03/30/2007 - 06:44
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi Mark,



HSRP will not help because phone need to register to the address specified under "telephony-services", not HSRP address.

Now CME also supports redundancy, that is indicated in the lastest feature guides, and that is what you would need to use.


Hope this helps, please rate all useful posts

Actions

This Discussion