03-31-2007 08:06 AM - edited 03-05-2019 03:13 PM
Hi All
Now that I have upgraded a Cat4006 Switch to the SSH version 8.4.11.GLX-K9. I have also generated the SSH keys and put in a permit ip list.
How do I set the Switch up with a username and psssword so that I can use my Client SSH SecureShell to connect to the Switch?
Thanks
03-31-2007 08:19 AM
Hi Friend,
set localuser user username password pwd privilege privilege_level
Have a look at this link for more details
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/8_3/configur/authent.htm#wp1122817
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/8_3/configur/authent.htm#wp1128465
HTH
Ankur
*Pls rate all helpfull post
03-31-2007 08:49 AM
Thanks for your help
03-31-2007 08:49 AM
Thanks.
I eventually found out on the switch.
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: