asa5510 no site to site with watchguard

Unanswered Question
Apr 2nd, 2007

error message

Apr 02 18:52:19 [IKEv1]: Group = 219.240.18.2, IP = 219.240.18.2, Removing peer from peer table failed, no match!

Apr 02 18:52:19 [IKEv1]: Group = 219.240.18.2, IP = 219.240.18.2, Error: Unable to remove PeerTblEntry

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mfreijser Tue, 04/03/2007 - 01:27

It is quite impossible to help you when you're not giving a lot of information. I can point you in the right direction according to the error message, but it would be better if your post some more information te next time you have a problem.

You can find a step-by-step instruction for configurating a VPN Tunnel between a ASA and a Checkpoint Firewall. The configuration is almost the same for a ASA to a Watchguard!

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008009420f.shtml

Configuration Guides for the ASA can be found here:

http://www.cisco.com/en/US/products/ps6120/products_installation_and_configuration_guides_list.html

Loads of configuration examples for the ASA can be found here:

http://www.cisco.com/en/US/products/ps6120/prod_configuration_examples_list.html

Hope this information can help you solve your problem, it is very important to check your configuration twice for configuration-problems !

Please rate if the post helps!

Regards,

Michael

Actions

This Discussion