04-02-2007 09:32 AM - edited 03-05-2019 03:15 PM
Hi
if i want to creat the L2 vlan on the notpad than paste it into the core;
e.g vlan 10 name test
vlan 11 name best
can i do this:
regards
Ali
Solved! Go to Solution.
04-02-2007 09:43 AM
04-02-2007 09:36 AM
Rather, this should work:
vlan 10
name test
vlan 11
name best
04-02-2007 09:42 AM
Hi pthiagas!
do i need to write this:
vlan 10
name test
????
04-02-2007 09:43 AM
You dont need to write ENTER.
vlan 10
name test
04-02-2007 09:52 AM
Ali,
What you have in your original posting should work. Here is the output from a 3550 switch.
SW1-3550#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
SW1-3550(vlan)#vlan 10 name test
VLAN 10 added:
Name: test
SW1-3550(vlan)#vlan 11 name best
VLAN 11 modified:
Name: best
SW1-3550(vlan)#exit
APPLY completed.
Exiting....
BTW, don't forget to type in exit to logout to save the config.
HTH
Sundar
04-02-2007 11:42 AM
HI Sundar
10xs for ur reply
Regards
ALI
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: