04-02-2007 09:32 AM - edited 03-05-2019 03:15 PM
Hi
if i want to creat the L2 vlan on the notpad than paste it into the core;
e.g vlan 10 name test
vlan 11 name best
can i do this:
regards
Ali
Solved! Go to Solution.
04-02-2007 09:43 AM
04-02-2007 09:36 AM
Rather, this should work:
vlan 10
name test
vlan 11
name best
04-02-2007 09:42 AM
Hi pthiagas!
do i need to write this:
vlan 10
name test
????
04-02-2007 09:43 AM
You dont need to write ENTER.
vlan 10
name test
04-02-2007 09:52 AM
Ali,
What you have in your original posting should work. Here is the output from a 3550 switch.
SW1-3550#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
SW1-3550(vlan)#vlan 10 name test
VLAN 10 added:
Name: test
SW1-3550(vlan)#vlan 11 name best
VLAN 11 modified:
Name: best
SW1-3550(vlan)#exit
APPLY completed.
Exiting....
BTW, don't forget to type in exit to logout to save the config.
HTH
Sundar
04-02-2007 11:42 AM
HI Sundar
10xs for ur reply
Regards
ALI
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide