04-02-2007 09:46 AM - edited 03-11-2019 02:54 AM
My network is very simple, like this: A DSL Modem is connected to a Cisco PIX 501 firewall/router, and a computer is connected to this firewall.
Now this PIX 501 box has two interfaces: Inside (192.168.1.1) and the netwroked PC (192.168.1.2). The outside interface is set to DHCP to be dynamically assigned an IP by the ISP's DNS server (192.168.0.1).
My networked PC (running Windows XP) is configured with an static IP (192.168.1.2), default Gateway (192.168.1.1 which is the PIX 501), and the DNS IP (192.168.0.1 which is the ISP's DNS Server).
But I can NOT access the internet. I can Ping 192.168.1.1 (the inside interface) but not the outside (192.168.0.1).
What am I missing and what should I do?
Thanks
Scott
04-02-2007 09:50 AM
post your config...
04-02-2007 10:04 AM
I am using PDM (the GUI tool) to access and configure the PIX box. While I am on the PDM, what is the command for me to get the "config"? (The PDM do a Command Line option).
04-02-2007 10:49 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: