Gents,

I am trying to setup a eazyvpn hardware client from a Cisco 837 router(Remote site) to a Cisco PIX 6.3(Central site)

I am unable to setup the tunnel for some reason. I have checked and rechecked the vpn config at both ends and they match. As a test, I took a 857 router and setup eazyvpn to the PIX and that worked. It just does not want to work with the 837 router. The IOS on the 837 is Version 12.2(11r)YV1, RELEASE SOFTWARE (fc1)

The fact that it works on a 857 router and not on 837 leads me to think that its something on the router rather than with the config. i.e. IOS does not suppor this feature

The VPN config on the router is:

crypto ipsec client ezvpn 203.x.x.186

connect auto

group vpn_hw_client key cisco

mode network-extension

peer 203.49.x.x

username vpn_hw_client password cisco

xuath uerid mode local

The VPN config on the PIX is:

vpngroup vpn_hw_client dns-server 192.168.x.x

vpngroup vpn_hw_client default-domain xxx.com.au

vpngroup vpn_hw_client split-tunnel 124

vpngroup vpn_hw_client idle-time 1800

vpngroup vpn_hw_client password cisco