SOHO 97

Unanswered Question
Apr 3rd, 2007
User Badges:

I have a SOHO 97

Router and IOS Information

-------------------------------------

Router Model : SOHO97

IOS Image Name : soho97-k9oy1-mz.123-8.T5.bin

IOS Version : 12.3(8)T5



for some reason, whenever the power is reset or the unit rebooted, it looses the configuration and reloads the default one. I have to use the console port and copy the config over again. I have issued a WRITE MEMORY which is successful, but the system will not load on restart - what am i doing wrong?


Many thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Danilo Dy Tue, 04/03/2007 - 03:35
User Badges:
  • Blue, 1500 points or more

Can you post the "show version" output? I suspect the last line is something other than 0x2102.


If the router is new, after you configure it, you need to set the configuration register to 0x2102 which is shown in the last line of the "show version" output.


To set the configuration register to 0x2102;

Router# config t

Router(config)#config-register 0x2102


Save the config. The next time you reload or power cycle the router it will use configuration register 0x2102 and load the save config.


http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a65a5.shtml

myles_boyd Tue, 04/03/2007 - 03:40
User Badges:

Thanks Medan, will check that tonight and report back



Thanks again

myles_boyd Wed, 04/04/2007 - 07:49
User Badges:

it was set to 0x242 - have reset to 0x212 jusr need to test now - many thanks

Actions

This Discussion