04-03-2007 03:57 AM - edited 03-03-2019 04:23 PM
We are unable to commission 2 Mbps link
between our two offices,
A end: cisco 1700 with WIC 2T Status : both s1 and S0 is up
B end: cisco 805 with Serial interface Status: Serial 0 down Error: SPEED EXCEEDS 512K INTERFACE SHUTDOWN
Can you please give suggestion .....
04-03-2007 04:43 AM
Hi,
It looks like clocking problem but I'm not too sure. Can you confirm with your line provider if the CSU setting is correct? For a while, here is a link to troubleshooting serial line problems http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800a758d.shtml
04-03-2007 07:00 AM
The 805 does not support serial speed faster than 512 Kbps, please read
http://newsroom.cisco.com/dlls/fspnisapib78b.html
Hope this helps, please rate useful posts using scrollbox below
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide