×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

cisco 831

Unanswered Question
Apr 3rd, 2007
User Badges:

First of all i domt know if this is the right place to post..


I got a 831 router and suddenly i stoped working. i plug in the concole cable and

it took me right to the rommon line.

tryd to write something in there but i cant ore the stuff i can write i cant use enter on

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
kristiant Tue, 04/03/2007 - 12:39
User Badges:

problem is that i cant write anything ore i cant execute the commands im writing trough hyper terminal.

second problem is that i domt have a new image avalible either


Edit: i can write now hyperterminal was buging

m-haddad Tue, 04/03/2007 - 13:09
User Badges:
  • Silver, 250 points or more

Hello,


I hope I can help more but to download the image you need to have support contract from Cisco. IF not you need to contact a Cisco Partner in your area.


Hope this helps,


Let me know if you need anything further,


Regards,


kristiant Tue, 04/03/2007 - 14:47
User Badges:

found a image but the interfaces goes down then i boot it

m-haddad Tue, 04/03/2007 - 14:50
User Badges:
  • Silver, 250 points or more

Hello Kristian,


I didn't understand your last post, so was your issue resolved or still facing problems?


Regards,


kristiant Tue, 04/03/2007 - 22:16
User Badges:

i found a new image whit ios hunter. but after i issue boot after the recovery, all interfaces except the wan port gets administratively down.

m-haddad Tue, 04/03/2007 - 23:23
User Badges:
  • Silver, 250 points or more

I don't see any problem here. It seems you also lost your configuration and the default is interfaces go into shut down state.


You can go to each interface and issue the command "no shut"

E.G

interface f0/0

no shut


Let me know if this helps,


Regards,


Actions

This Discussion