Cisco 3825 as a EZ VPN Server

Unanswered Question
Apr 3rd, 2007
User Badges:

I have a Cisco 3825 setup as a EZ VPN Server. I can connect and authenticate to it but I can't pass traffic (at least that's what it seems like).

My internal network is 192.168.111.x and my VPN pool is 10.13.0.x. I am succesfully assigned an IP from that pool when I authenticate with the Cisco client.

Here is my Group part of my config with my domain name pulled out:

crypto isakmp client configuration group SRC

key "whatever"




pool SDM_POOL_1

acl 106



And here is my ACL:

access-list 106 remark VPN ACL

access-list 106 permit ip any

access-list 106 permit icmp any any

Also, just in case it helps, the interface that I am terminating on is a loopback. My external interface has an IP that my ISP will not route so I NAT'd one of my public IP's to the Loopback.

Please let me know if you need more info and I'll be happy to give it to you.

I know I'm close, just one last thing to tweak. Thanks for all the help!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion