Lan Wan Lab

Unanswered Question

I'm working to connect all five routers including 3 2501, 1 2507 and a 1720 and I'm able to connect the serial ports with cross over cables, and even the Ethernet ports, but need some help to connect my 1720 Wic cards. I have two 56K csudsu Wic cards and would love to connect them into my network but I don't know how and need some help on the best way to make this happen. I'm willing to buy different Wic cards if I need to. I need the experts to help me because I'm lost on this. Thanks for the step-by-step help on this.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
drolemc Tue, 04/10/2007 - 06:26
User Badges:
  • Silver, 250 points or more

The Cisco WIC-1ENET card requires Cisco IOS Release 12.2(2)XJ or later if the card is installed in any WIC slot other than slot 0 or if more than one card is installed.

The card can be used with Cisco IOS Release 12.2(4)T, but the card must be installed in slot 0 and only one Cisco WIC-1ENET card can be installed in the router.

Refer these links for configuration:


This Discussion