Protocols/ports opening on a Firewall

Answered Question
Apr 4th, 2007
User Badges:

Hello,

I am testing to put an IP Phone on a switch, which is separated to the CCM by a Firewall.

I have opened SCCP (TCP 2000) and RTP (UDP 19384 and 32768), and TFTP.

I does not work.

Did I have forget something? Could you tell me exactly what I have to open and in which direction?


Thanking you in advance

Correct Answer by Brandon Buffin about 10 years 3 months ago

One problem with the information above is that RTP uses ports 16384 - 32768. Also, take a look at the Signaling, Media and Other Communication Between Phones and CallManager section of the following link. It gives the ports and directions for phone to CCM communication.


http://www.cisco.com/application/pdf/en/us/guest/products/ps5820/c1693/ccmigration_09186a00807217e1.pdf


Hope this helps. If so, please rate the post.


Brandon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Brandon Buffin Wed, 04/04/2007 - 09:40
User Badges:
  • Purple, 4500 points or more

One problem with the information above is that RTP uses ports 16384 - 32768. Also, take a look at the Signaling, Media and Other Communication Between Phones and CallManager section of the following link. It gives the ports and directions for phone to CCM communication.


http://www.cisco.com/application/pdf/en/us/guest/products/ps5820/c1693/ccmigration_09186a00807217e1.pdf


Hope this helps. If so, please rate the post.


Brandon

Actions

This Discussion