I have a 2507 router with 16 port hubs, and my question is if I have five routers is there away to connect the five router console ports to the 2507 and be able to connect to each from the 2507 router. I thought this was possible and if so how do I setup the 2507 to allow this. Thanks
You cannot connect the console port(s) of the five routers to the ethernet port(s) on the hub. However, you can connect the ethernet interface on the five router(s) to the hub ports if you desire so.
To access the 5 routers via the console you need a terminal server, something like a Cisco 2509, and you can use an octal cable between the console of the terminal server and console of all the other 5 routers.