04-04-2007 02:57 PM - edited 03-14-2019 08:50 PM
Hi all,
I have a 5350 with a voice TI PRI connected to it. I can make outgoing calls (Sip -> 5350 -> PRI) perfectly fine. When I dial on of my DIDs (PRI -> 5350) the 5350 is answering and giving dialtone to the user. When I remove the dial-peer voice 1000 from the config the inbound caller hears a data modem/fax machine.
How to I troubleshoot/resolve this?
Thanks,
Max
Solved! Go to Solution.
04-04-2007 03:03 PM
Hi,
you need one dial-peer pots having direct-inward-dial, matching the called number
So for example, if telco is sending you four digits, always starting with 3
dial-peer voice 10 pots
incoming called-number 3...
direct-inward-dial
If telco send the full number, replace 3 with your partial number an use dots where the DID digits are.
When there is no match, the call will land on a modem.
Hope this helps, please rate all useful posts!
04-04-2007 03:03 PM
Hi,
you need one dial-peer pots having direct-inward-dial, matching the called number
So for example, if telco is sending you four digits, always starting with 3
dial-peer voice 10 pots
incoming called-number 3...
direct-inward-dial
If telco send the full number, replace 3 with your partial number an use dots where the DID digits are.
When there is no match, the call will land on a modem.
Hope this helps, please rate all useful posts!
04-04-2007 03:13 PM
This was exactly what I needed. Thank you very much.
04-04-2007 03:14 PM
Ah, now that was quick.
Thank you for the nice rating!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: