2611XM - Cookie Information is corrupt

kresimir.trobic · ‎04-05-2007

"WARNING: Cookie information is corrupt"

loadprog: error - Invalid image for platform

e_machine= xx , cpu_type = xx

Cannot load "Flash:"

Does anyone have Cisco 2611XM router and can send me a "show cookie" from ROMmon?

I need to input new cookie information in my router.

pacameron · ‎04-08-2007

This error message means the software image on the flash memory is not for a 2600 router.

Let the router go into ROMMON, then do a TFTPDNLD to load a new image into the router. Refer here for details -

http://www.cisco.com/warp/customer/471/76.html

This should fix the problem.

kresimir.trobic · ‎04-09-2007

This is not the case. When I issue command "show cookie" all fields are 00 00 00 00. That means that router cpu, interface, mac-address are erased. I need to input this information in a router (memory).

kresimir.trobic · ‎04-16-2007

System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???|?C?|ˆ?|?C?

loadprog: error - Invalid image for platform

e_machine = 43, cpu_type = 115

boot: cannot load "flash:"

rommon 1 > cookie

cookie:

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

rommon 2 > priv

Password:

I need password to enter privilege rommon mode and input new cookie information.

paolo bevilacqua · ‎04-16-2007

Hi, look at this link for rommon cookie recovery:

http://www.tech-recipes.com/cisco_router_tips982.html

Hope this helps, if please rate post!