04-05-2007 08:42 AM - edited 03-03-2019 04:26 PM
Hello is there a way to disable the port security and bpduguard from certain port interfaces. I cant find it in the GUI, could someone let me know of the process
04-05-2007 08:55 AM
I don't know how to disable it via the GUI but via the command-line interface you can do the following:
interface fa0/1
no switchport port-security
no spanning-tree bpduguard
Or for a range of ports you can do:
interface range fa0/1 - 4, fa0/15
no switchport port-security
no spanning-tree bpduguard
04-05-2007 10:55 AM
Great, can anyone tell me how to get into the command line interface, I cant seem to telnet into this switch and I also tried a console cable but nada.
04-05-2007 11:20 AM
Looks like these particular devices dont come with a Command Line Interface, is there anyway at all to change these port settings or am I out of luck
04-05-2007 12:13 PM
Hi,
I haven't personally used a Cat 500 series switch. But, I found this document that should help you disable port security and bpduguard. What you are seeing is the default behavior of smartport role selected for that port and you may have to change the role to something like 'other' to disable the feature(s).
Here it is for your reference;
http://www.cisco.com/en/US/products/ps6545/products_configuration_example09186a00806da6c9.shtml
HTH
Sundar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide