CNA 5.1 System Notification Help!!!

Unanswered Question
Apr 5th, 2007
User Badges:

We have a small network of around 15 1812s and 4 Pix 501 all connected via VPN. CNA works great and I was able to setup the System Notification to email me via SMTP with the routers mapped. After we added teh PIX 501s, I cannot send email. I keep getting the message that either the Server address or sender address is wrong.

There is no firewall blocking any protocols on the machine and the current fireall that the Network Mgt Station is attached to only has a firewall on incoming traffic from the Internet. The Network Management is on a Dynamic VPN to the Hub/Base router.

All help is appreciated.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion