04-08-2007 02:26 AM
How to use an Advanced Baseline Template (LMS 2.6 RME 4.0.5) to reomove or change as example "interface description" on the list of routers
Solved! Go to Solution.
04-24-2007 07:51 AM
04-08-2007 05:53 AM
Interface description isn't something typically changed en masse since each one will generally be unique. However, if you have a bunch of spoke routers, and each have a Serial0 interface (for example) that attaches back to a head end, you could do something like:
SubMode: interface Serial0
+ description Connection to Head End
For all routers that did not have this description under interface Serial0, they would be marked as non-compliant, and you could then deploy this change to them.
04-08-2007 10:01 PM
Thanks
Good Example, if all routers marked as compliant, how I can to remove it
Regards
04-09-2007 08:24 AM
Assuming all the descriptions are the same:
- description Connection to Head End
If you don't want any inerface description:
- [#description .*#]
04-24-2007 04:00 AM
I tried to build advanced template but not succeeded.
Could you please give full steps to build advanced template to remove the Description from Ethernet Interfaces on the different routers
Regards
04-24-2007 07:51 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide