04-08-2007 05:25 PM - edited 03-05-2019 03:21 PM
I have CISCO 2811 router. I have tried to change the sequence of router to load IOS on it.
I selected ROM first and then FLASH memory for router to load IOS.
But whenever I restarts the router, it loads IOS from FLASH only and not from ROM.
It gives an error msg. showing "unable to boot from ROM" .
I have tried with different register settings of the router.Router ROMis working properly as I can load IOS from ROM in the absence of FLASH.
Pls let me know if its a hardware problem or i am doing something wrong.
Solved! Go to Solution.
04-08-2007 10:16 PM
Hi
Rommon mode is used in absence of the valid IOS on flash.
The rom contains a lower verions of IOS used to troubleshoot booting problems.So in the presence of FLASH which contains the IOS it will not go to rommon mode.
Thanks
Mahmood
04-08-2007 10:16 PM
Hi
Rommon mode is used in absence of the valid IOS on flash.
The rom contains a lower verions of IOS used to troubleshoot booting problems.So in the presence of FLASH which contains the IOS it will not go to rommon mode.
Thanks
Mahmood
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide