Track status through SNMP

Answered Question
Apr 8th, 2007

Hi!

Router checking availability host through track:

!

track 123 rtr 1 reachability

delay down 100

!

where

!

rtr 1

type echo protocol ipIcmpEcho XXX.XXX.XXX.XXX source-ipaddr YYY.YYY.YYY.YYY

rtr schedule 1 life forever start-time now

!

I can see following information from console:

router#sh track 123

Track 123

Response Time Reporter 1 reachability

Reachability is Up

33 changes, last change 20:14:15

Delay down 100 secs

Latest operation return code: OK

Latest RTT (millisecs) 144

Tracked by:

ROUTE-MAP 0

How can I see track status through SNMP?

regards

I have this problem too.
0 votes
Correct Answer by Craig Balfour about 9 years 7 months ago

As far as I know there is no MIB for accessing object tracking via SNMP.

The best you can do access information about your Service Assurance Agent (SAA) / rtr job using the CISCO-RTTMON-MIB mib.

Use the following URL to see more about the CISCO-RTTMON-MIB in SNMP Object Navigator:

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.4.1.9.9.42

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Craig Balfour Tue, 04/10/2007 - 03:28

As far as I know there is no MIB for accessing object tracking via SNMP.

The best you can do access information about your Service Assurance Agent (SAA) / rtr job using the CISCO-RTTMON-MIB mib.

Use the following URL to see more about the CISCO-RTTMON-MIB in SNMP Object Navigator:

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.4.1.9.9.42

nesterove Tue, 04/10/2007 - 03:46

Thank you Graig!

It's usefull info! I have found required parametr:

.iso.org.dod.internet.private.enterprises.cisco.ciscoMgmt.ciscoRttMonMIB.ciscoRttMonObjects.rttMonCtrl.rttMonCtrlOperTable.rttMonCtrlOperEntry.rttMonCtrlOperTimeoutOccurred

.1.3.6.1.4.1.9.9.42.1.2.9.1.6

if false - then all ok

if true - host unreachable

Actions

This Discussion