CSS load balancing and Remote desktop

Unanswered Question
Apr 9th, 2007
User Badges:

hi all!


here is config:

!*************************** GLOBAL ***************************

cdp run

ip redundancy


ip route 0.0.0.0 0.0.0.0 10.12.248.1 1


!************************* INTERFACE *************************

interface 2/1

bridge vlan 2


interface 2/2

bridge vlan 3


!************************** CIRCUIT

circuit VLAN1

redundancy


ip address 10.12.248.101 255.255.248.0


circuit VLAN2


ip address 192.168.1.1 255.255.255.252

redundancy-protocol


circuit VLAN3

redundancy


ip address 192.168.7.25 255.255.255.0


!************************** SERVICE **************************

service Node1

ip address 192.168.7.23

active


service Node2

ip address 192.168.7.24

active


!*************************** OWNER ***************************

owner RenCap


content Cluster_Nodes

add service Node1

add service Node2

vip address 10.12.248.100

active


content Mngmnt_Node1

add service Node1

vip address 10.12.248.102

active


content Mngmnt_Node2

add service Node2

vip address 10.12.248.103

active


CSS_Primary#



Remote desktop of Node1 and Node2 is accesible, but only by local login and password.


How i can use tacacs for authentication on Node?


in other words, how can be LAN servers available from Node1 and Node2?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion