hi all!
here is config:
!*************************** GLOBAL ***************************
cdp run
ip redundancy
ip route 0.0.0.0 0.0.0.0 10.12.248.1 1
!************************* INTERFACE *************************
interface 2/1
bridge vlan 2
interface 2/2
bridge vlan 3
!************************** CIRCUIT
circuit VLAN1
redundancy
ip address 10.12.248.101 255.255.248.0
circuit VLAN2
ip address 192.168.1.1 255.255.255.252
redundancy-protocol
circuit VLAN3
redundancy
ip address 192.168.7.25 255.255.255.0
!************************** SERVICE **************************
service Node1
ip address 192.168.7.23
active
service Node2
ip address 192.168.7.24
active
!*************************** OWNER ***************************
owner RenCap
content Cluster_Nodes
add service Node1
add service Node2
vip address 10.12.248.100
active
content Mngmnt_Node1
add service Node1
vip address 10.12.248.102
active
content Mngmnt_Node2
add service Node2
vip address 10.12.248.103
active
CSS_Primary#
Remote desktop of Node1 and Node2 is accesible, but only by local login and password.
How i can use tacacs for authentication on Node?
in other words, how can be LAN servers available from Node1 and Node2?